DURST MODULAR 70 PRO HEILAND LED ENLARGER***

Specification

A module of 400 LEDs and a diffusor plate positioned in front ensure an evenly illuminated area of 6x7cm.

Maximum negative size: 6×7
Light source: LED
Head type: LED cold light source
Interchangeable heads: Yes
Filter drawer: No
Wall enlargements: Yes
Floor enlargements: No

Other Features

Modular head system

Includes

Lamp
Negative carrier
1 pair of negative carrier inserts of your choice
Lens panel
Transformer

B&W control unit for B&W processes using an external timer 

If you like to use your timer or analyser further on, please choose this control unit to set the colour of the LED cold light source.

By rotating the left knob choose the principal mode:

White light for focusing purposes or to expose fixed grade paper.

Green and blue light to expose multigrade paper in the range of grade 00 to 5.

Safe red light to align the paper or to position your hands or a tool for dodging.

The intensity could be adapted to the print size in a range of 2 f-stops by means of the right hand knob.

All values are dialled in by rotary knobs with rests and are displayed by a safe red LCD in large numbers. This enables convenient operation and repeatable print results.

A high tech 24V power supply ensures stable light output, even during mains voltage fluctuations.

Colour control unit for colour processes

Choose that control unit to expose colour paper either in RA4 or Ilfochrome processes.

The colour of light output is composed of primary colours Red, Green, and Blue. Each colour is modified separate by a rotary knob with rests.

A yellow low luminance display indicates filter equivalent values in the range of 0 … 200.

White light for focusing is selected by pushing a knob.

A high tech 24V power supply ensures stable light output, even during mains voltage fluctuations.

The exposure time is controlled by a timer or colour Analyser already existing in your dark room.

Splitgrade control for B&W process using splitgrade

The combination of both products SPLITGRADE + LED cold light source yields to an unexpectedly performance and printing options.

Not only, that you receive a pre-calibrated system for a wide range of multigrade papers. Exposing fixed grade papers is also possible.

For focusing purposes switch on the white light by pressing one knob only on the Splitgrade.

Determination of the exposure time and paper contrast is done within seconds by scanning the light on the easel in the light and shadow areas.

Then you have the option to print with mixed light (like with a traditional multigrade head) or with split light which is preferred by a lot of fine art printers.

In addition a shutter function is included, as the LEDs switch on and off within 1/100 of a second.

The red LED light can be switched on separate to position the paper and the easel or to position the dodging tool before you start the exposure with the foot switch.

Also you can dim the exposure light in a range of 2 f-stops according to the printing scale. This enables the same functionality as a neutral density filter.

Furthermore you have no creative limitation on any fine art printing technique!